Brantz Standard Wheel Sensor

The Brantz standard wheel sensor can be mounted on almost any car in a variety of different locations and set ups. The most common set up is mounted to pick up the metal hub bolt heads, on the brake disc of a non-driven wheel, as they pass by. A minimum of 4 bolts are required, however 6 is recommended. Steel is the optimum target and being at least 20% larger than the face of the sensor, this is also true for the size of a hole being used to trigger the sensor.

Alternative positioning:

• Mounted to pick up on flying tabs (minimum of 2 positioned 180° apart) fastened on the bolts of the Prop Shaft’s Universal Joint
• Mounted to pick up off an ABS ring
• Mounted through the back plate of Drum Brakes to pick up off the 4 hub studs
• Mounted to detect an absence of steel, for example drilled holes in a rotating disc

Specifications

• Suitable for all the Brantz range of Tripmeters
• Pick up off any metal object passing within 1mm
• 12mm diameter thread
• Cable length: ~2.1M
• 1 Pulse per Detection
• Weight: 102g

Approximate lead time: 7-10 days from order with the supplier, plus 24 h delivery once we receive it.