AutoGlym Polar Seal

DESCRIPTION
Polar Seal is a protective coating specially formulated for application through a pressure washer with a foam gun. It imparts a hydrophobic layer to the paint that causes water to bead on the surface, reducing the time it takes to dry the car. Simply spray onto a clean, wet vehicle, rinse and dry to leave a high-gloss finish.

FEATURES
– High-gloss protection. A protective and hydrophobic coating for a quick and easy high-gloss finish.
– Quick and easy pressure washer application. Specially formulated for application through a pressure washer with a foam gun.
– Reduces water build-up. Imparts a hydrophobic coating to paint that causes water to bead on the surface.
– Quick drying time. Reduces the drying time of any vehicle.

DIRECTIONS FOR USE
1. Before starting, check that the bodywork and wheels are cool to the touch and out of direct sunlight.
2. We recommend starting with a snow foam such as Polar Blast to gently loosen dirt, followed by Polar Wash to remove any dirt or contamination from the bodywork.
3. Only a small amount of Polar Seal is required. Pour no more than 40 ml (four capfuls) into your foam bottle and then add at least 200 ml of water. This should be enough to cover your vehicle. There is no benefit in using more than 40 ml, as excessive application may compromise the finish.
4. Spray Polar Seal onto the clean, wet vehicle, ensuring all exterior surfaces are covered, although avoid direct application to the windscreen.
5. Rinse and dry the vehicle completely to reveal a high-gloss finish protected with a hydrophobic coating. The vehicle should be dried with a cloth and not left to air dry, as water spots may appear.
6. Use Autoglym glass cleaner to clean the windscreen and wiper blades to ensure they do not smear.